Flashing Boots
Lifetite Metal Products
Flashing Boots
LifeTite Metal Products offers premium roof penetration “Roofjack” flashing boots in a wide range of sizes and colors. Properly installed pipe flashing boots will keep your roof system water-tight and well kept. LifeTite partners with SealTite to provide customers with exceptional metal roofing components.
- Manufactured from EPDM or silicone rubber, ROOFJACK is compounded for maximum resistance to ozone, UV light, & temperature extremes.
- Flexible aluminum base will allow the flashing to conform to any metal roof configuration. Pipe location can be centered in the flat of the panel or the rib. Urethane sealant & self-drilling screws complete the installation
- ROOFJACK are well-marked so they can easily be cut with shears to fit exactly the pipe size used.
- ROOFJACK are available in Black or Gray EPDM as well as Red or Gray high temperature Silicone.
- High Temperature Silicone is Now Available in Gray
For specs & technical information visit SealTite.com.
Standard EPDM Pipe Flashing Boots & High Temperature “Silicone” Pipe Flashing Boots
| Square Base | Pipe Size | Base Dimension | Standard Colors |
|---|---|---|---|
| MINI | 1/8”-3/4” | 2 - 1/4” (57mm) | Black/Gray EPDM & Red Silicone |
| #1 | 1/4”-2-3/4” | 4-1/2” (114mm) | Black/Gray EPDM & Red Silicone |
| #2 | 7/8”-4” | 6” (152mm) | Black/Gray EPDM & Red Silicone |
| #3 | 1/4”-5-3/4” | 8” (203mm) | Black/Gray EPDM & Red Silicone |
| #4 | 2-3/4”-7” | 10” (254mm) | Black/Gray EPDM & Red Silicone |
| #5 | 4”-8-1/4” | 11” (279mm) | Black/Gray EPDM & Red Silicone |
| #6 | 4-3/4”-10” | 12” (304mm) | Black/Gray EPDM & Red Silicone |
| #7 | 5-1/2”-11-1/2” | 14” (355mm) | Black/Gray EPDM & Red Silicone |
| #8 | 6-3/4”-13-1/2” | 17” (431mm) | Black/Gray EPDM & Red Silicone |
| #9 | 9-1/2”-20-1/2” | 25” (635mm) | Black/Gray EPDM & Red Silicone |
| MAXI | 12”-28-1/2” | 34” (863mm) | Black/Gray EPDM & Red Silicone |
Flashing Boot Color Selection
Retro-Fit EPDM Pipe Flashing Boots w/ zipper
| Retro-Fit | Pipe Size | Base Dimension | Standard Colors |
|---|---|---|---|
| #1 | 1/2” - 4” (12.7 - 101.6mm) | 8” - 3/16” (80.96mm) | Black EPDM/Grey EPDM/Red Silicone |
| #2 | 4” - 9-1/4” (101.6 - 135mm) | 14-1/4” (361.95mm) | Black EPDM/Grey EPDM/Red Silicone |
| #3 | 9-1/4” - 16-1/4”(235 - 412.8mm) | 21-1/2” (546.1mm) | Black EPDM/Grey EPDM/Red Silicone |
For specs & technical information visit SealTite.com.
